How to make SOLDERING IRON at home, no nichrome wire - EASY

How to make Foam Cutter at Home

In this video i will show you how to create foam cutter at very simple way.
       You can use for cutting various shapes, letters, etc.I presented all the steps to make it easier to understand.

I apologize for the poor quality somewhere in the video i had a little noise.

Materials that you need :

1. Heater wire from 220 volts and 600 watts (i use from old heater)
2. Two wood pieces with length of 30 centimeters and thickness 2,5 x 2,5 cm
3. One wood piece of 24.5 cm and thickness 2.5 x 2.5 cm
4. One wood piece of 25.5 cm and thickness 2.5 x 2.5 cm
5. Four terminals.
5. One switch with three pins.
6. glue
7.Two wires
8.One cable with two wires
9. One female adapter connector and one terminal
10. One adapter 12 volts
11. Screws for wood with length of 5 cm

Tools:

1.Multymer-instrument for measure resistance
2. Screwdriver
3.Pliers
4.Drill machine
5.Аdhesive tapehttps://www.youtube.com/channel/UClGqvBrhFtWgRVnZSnWujJA